Viewing by appointment only we are not always on site. Call us, email us, details are to the right.
LOOK KEO 2 MAX ROAD PEDALS.EXCELLENT CONDITION.THE PEDALS OF CHOICE OF MANY PRO TEAMS/RIDERS.COST:$140NEW!!!(CLEATS NOT INCLUDED IN THE AUCTION)
If your looking at this listing then you already know how good these pedals are.Alberto Contador won the tour de france on these pedals.that said you know these pedals are the real deal!!!(stock photo is slightly different than actual item for sale)
Complete with an oversized axle, three bearing double-sealed bearing axle.New 12% larger stainless steel platform area for cleat support and improved power transmission. BODY - COMPOSITE
AXLE - STEEL
THREAD - 9/16 X 20 MM
ROLLER BEARING - 2 ROLLER BEARINGS, 1 NEEDLEBEARING
AXLE / SOLE HEIGHT - 15,7 MM
PEDAL / CRANK AXLE DISTANCE - 53 MM
MULTITENSOR - YES- ADJUSTABLE FROM 9 TO 15 NM
ANGULAR FREEDOM - 0°, 4.5° OR 9° ACCORDING TO TYPE OF CLEAT (BLACK, GREY OR RED)
PEDAL WEIGHT - 130 G PER PEDAL (328 G PER PAIR WITH CLEATS AND HARDWARE)
COLOURS - GREY BODY / BLACK LEVER
LARGE AND RESISTANT CLEAT CONTACT AREA
For a more efficient and more comfortable pedal stroke, the Kéo 2 MAX has a cleat contact surface area 12% larger than the Kéo Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body.
LIGHTWEIGHT : 130g
With its 130g weight Keo 2 Max is one of the lightest pedals in its category.
This is possible thanks to the use of injected carbon and composite materials, which reduce weight while maintains durability.
Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.
The new line of Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781).
Dual seals increase bearing longevity.