Updated with a new material and new design. The TL-4.2 features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed. Perfect…
The FR-7 Freewheel Remover has 12 splines with an outside diameter of 23mm and was originally designed for Falcon® brand freewheels but may fit others with those specific measurements. Heat treated…
Allows truing stand to be used with 12mm, 15mm, 20mm, and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2.
Single Speed Spanner Designed and built especially for single speed bikes, the SS-15 is a forged, multi-purpose ride saver.Just the right size and length (17cm/7”) to take along or to wrench in the…
Universal Crank Puller for Square Taper and Splined Cranks The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square…
A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have…
The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each…
Unique four-sided design provides extra strength & support & helps prevent slipping & deformation of aluminum nipples. Uses the same world famous design & high quality materials as our three-sided…
The BBT-10.2 is a specialty tool for removing and installing crank arm caps on Shimano® Hollowtech® II cranks, including those found on e-bikes. Includes a built-in hook to lift the safety plate…
A small, handy tool designed to remove and install Schrader and Presta valve cores and to remove and install Presta valve extenders with 5mm wrench flats. Note: Not all Presta valve cores are…
The SW-13 is a forged double ended spoke wrench designed to fit select Mavic® wheels, including SSC Ksyrium & Crossmax SLR wheels. Precision machined, plated & vinyl dipped for comfort & long life.
Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and…
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special "Y" head design puts more material where it's needed for strength and durability.…
Designed and built to remove and install the lockring that retains front chainrings found on Shimano¬Æ STEPS¬Æ e-bike motors. Fits Shimano¬Æ STEPS¬Æ E6100, E7000, E8000 and E9000 e-bike motor systems…
A version of our dependable FR-5.2 with an added 12mm guide pin for added stability when removing lockrings from thru axle hubs. Designed for 12 spline 23.4mm diameter tool fittings - the most common…