"CYCLUS TOOLS crownrace cutter 1 1/8 30mm, complete with cutter. Create exactly levelled fork cone seats with this face milling tool. the milling cutter is suitable for 1 1/8"" (30.0 mm) fork cone…
"Headset pressing tool, constructed for simultaneous pressing in 1 1/2"" top and bottom headset cups into the head tube. Tip: Before pressing in headset cups, checking the accuracy of the cup seats…
"CYCLUS TOOLS single die 1"" 1/8- for 1"" 1/8 fork tube thread Cutting die for cutting or re-cutting fork tube threads for 1"" fork assembly. Diameter: 1"" 1/8 It includes: die without die stock. So…
"With the fork cone puller you remove the fork cone of the headset from the fork cone seat. The advantage of the fork cone puller is that you do not scratch the fork when removing the fork cone and…
"CYCLUS TOOLS headset cup removal punch for 1 1/2"" headset. This impact tool makes the safe removal of headset cups from your frame head tube a breeze. The diameter of the extractor is 39 mm. Tip:…
"CYCLUS TOOLS bearing set for all head set presses - per piece with inner diameter 17mm. Spare part: Individual ball bearing race for all head set presses (art. 720009) Inner diameter 17mm" Part…
"CYCLUS TOOLS frame alignment checking tool. With this tool you can determine any deformation or twisting of the frame. Place the tool both on the head tube and on the seat tube; then use the…
With the head tube reamer you can prepare head tubes with an inner diameter of 42 mm and a milling depth of 6.0 mm for the installation of an integrated headset. The angle of the bearing shell seats…
"CYCLUS TOOLS Star nut setting tool for inserting star nuts into the fork steerer tube. This impact tool guarantees exact insertion of the Ahead star fangled nut into the steerer tube with a…
"CYCLUS TOOLS gear hanger alignment tool. Use this tool to check and correct the exact geometric position/angle of the rear mech hanger in relation the frame dropout. In order to do this, first…
"CYCLUS TOOLS single die 1 ""- for 1"" fork tube thread Cutting die for cutting or re-cutting fork tube threads for 1"" fork assembly. Diameter: 1"" It includes: die without die stock. So you need a…
"The Cyclus Tools crown race installer enables you to install a crown race ring onto a 1"" and 1 1/8"" fork steerer tube. The installer must be carefully placed on top of the steerer tube in order…
"CYCLUS TOOLS crownrace cutter 1 1/8 30mm, complete with cutter. Create exactly levelled fork cone seats with this face milling tool. the milling cutter is suitable for 1 1/8"" (30.0 mm) fork cone…